NEWS CENTER
Pay attention to market trends and share industry information
Use and storage of high pressure hose
发布时间：
2021-09-15
People understand that whether they choose high-pressure hoses, they must have a sufficient grasp of the relevant * * knowledge of this commodity, as well as the high-pressure hoses detailed by people. In order to further promote everyone's grasp of high-pressure hoses, the next network will be shared by everyone: the actual regulations on the application, storage and storage of high-pressure hoses.
Practical regulations for application, storage and storage of high-pressure rubber hose
People understand that whether they choose high-pressure hoses, they must have a sufficient grasp of the relevant * * knowledge of this commodity, as well as the high-pressure hoses detailed by people. In order to further promote everyone's grasp of high-pressure hoses, the next network will be shared by everyone: the actual regulations on the application, storage and storage of high-pressure hoses.
When the high-pressure hose is in operation, the high-pressure hose shall not be distorted, and bending shall be prevented as far as possible. If it is necessary to bend, it is necessary to ensure that the bending half diameter is not very small, which is generally not less than 15 times the pipe diameter. Otherwise, the stainless steel wire on both sides of the raising layer will be stretched, and the stainless steel wire on the inner side will be reduced, thereby reducing the compressive strength of the pressure test of all high-pressure hoses, and ultimately endangering the service life of high-pressure hoses.
When the high-pressure hose is not used for a long time, the internal water should be drained, and the plastic hose should be folded and placed flat after being rolled according to the specified size. Attention should be paid to the bending of the surrounding position of the high-pressure rubber hose connector. The connector should be wiped with anti rust agent to prevent contact with high temperature, high pressure and strong corrosive substances.
In the actual cleaning process of high-pressure rubber hose, it is necessary to try to prevent the high-pressure water gun from being frequently opened and closed, so as to reduce the harm of single pulse of working pressure to the plastic hose, and then increase the service life of high-pressure rubber hose.
Relevant news
KEMAIER
Hebei kemaier rubber & Plastic
Tel：+86 318 4309908
Mob：+86 15901470995/15533805673
Fax：+86 318 4309908
Add：Jing County, Hengshui City, Hebei Province, China
copyright © 2022 Hebei kemaier rubber & Plastic